FORMULATION GUIDE / EMULSION SCIENCE

Balance emulsifiers with confidence

A practical HLB calculator guide for determining an oil phase target, blending surfactants, and building a more credible first emulsion prototype.

Low values favor oil; higher values favor water. The target describes the emulsifier balance your oil phase requires.

01 / FOUNDATION

What HLB is, and why it matters

HLB — Hydrophilic-Lipophilic Balance — is a 0-20 scale introduced by William Griffin in 1949 to describe how strongly a non-ionic surfactant prefers water or oil. A low HLB value means the molecule is oil-loving (lipophilic); a high value means it is water-loving (hydrophilic).

In cosmetic formulation, HLB gives you a first-approximation answer to a very common question: which emulsifier, and how much of it, will keep this oil phase suspended in this water phase? Get it wrong and your cream breaks — the oils rise, the water weeps, and the batch is scrap.

Typical application ranges

  • 3—6 Water-in-oil emulsions: rich balms and cold creams
  • 7—9 Wetting agents
  • 8—18 Oil-in-water emulsions: lotions, milks, and most facial creams
  • 13—15 Detergents and cleansers
  • 15—18 Solubilizers for fragrances and essential oils
  • 02 / CALCULATE

    Find the required HLB of the oil phase

    Every oil, butter, wax, and lipophilic active has a required HLB — the HLB value at which it emulsifies most stably in water. The required HLB of a full oil phase is the weighted average of its components.

    Worked example

    An oil phase of 60% caprylic/capric triglyceride (required HLB ≈ 5), 30% shea butter (required HLB ≈ 8), and 10% cetyl alcohol (required HLB ≈ 15):

    That 6.9 target tells you what your emulsifier system needs to deliver — not what any single emulsifier off the shelf will give you.

    03 / BLEND

    Blend two emulsifiers to hit the target

    Single emulsifiers rarely land exactly on your required HLB. Blending one low-HLB emulsifier with one high-HLB emulsifier lets you dial in almost any value. Solve for the fraction x of the low-HLB emulsifier:

    Continuing the example — target HLB 6.9, using sorbitan stearate (HLB 4.7) and polysorbate 60 (HLB 14.9):

    Total emulsifier is usually 3-6% of the finished formula for an O/W lotion. Apply those percentages to whichever total you choose (e.g. 4% total → 3.14% sorbitan stearate + 0.86% polysorbate 60).

    04 / APPLY

    Use the Alchemix HLB solver

    Manually solving HLB math is fine for a single test batch, but tedious across a product line. The Alchemix HLB solver ties directly into your formula:

  • Detects the oil phase Uses your current recipe and the ingredient database.
  • Uses your current recipe and the ingredient database.

  • Computes required HLB Updates the weighted target as the formula changes.
  • Updates the weighted target as the formula changes.

  • Suggests useful pairs Finds emulsifiers that bracket the target.
  • Finds emulsifiers that bracket the target.

  • Flags mismatches Highlights a blend that sits too far from target.
  • Highlights a blend that sits too far from target.

    Open the formula lab

    05 / VALIDATE

    HLB is a starting point, not a stability guarantee

    Use HLB to choose a credible first emulsifier system. Confirm the finished formula with physical and microbiological testing appropriate to the product and market.

    HLB was derived from ethoxylated non-ionic surfactants. It is genuinely useful, but it does not account for:

  • 01 Ionic emulsifiers (anionic, cationic) — HLB values are not directly comparable.
  • 02 Phase-inversion temperature behavior in hot-process emulsions.
  • 03 The rheology contribution of thickeners, gums, and structuring waxes.
  • 04 Preservation, pH stability, and long-term freeze-thaw performance.
  • Treat the HLB solver output as the strongest first guess, then confirm with a small stability panel — 48-hour ambient, 45 °C oven, and a freeze-thaw cycle.

    06 / REFERENCE

    Frequently asked questions

    What is HLB in cosmetic formulation?

    How do I calculate the required HLB of an oil phase?

    How do I blend two emulsifiers to hit a target HLB?

    Move from target to working formula

    Build the oil phase, hit Solve, and get a stable emulsifier blend in seconds.