GUIDE · 9 MIN READ

Natural Gel Cleanser Formula

A structured, evidence-based guide to formulating a mild botanical facial cleanser with plant-derived surfactants, an acidic preservative system and a complete 100 g laboratory formula.

Reviewed against EU Regulation 1223/2009, CIR, COSMOS and IFRA sources

The short answer

  • 1 Build the cleansing system with decyl glucoside and cocamidopropyl betaine for mild foam.
  • 2 Pre-disperse xanthan gum in glycerin, then hydrate it in the water phase for a smooth gel.
  • 3 Blend glyceryl oleate into the surfactants before incorporating them slowly to limit aeration.
  • 4 Add panthenol, allantoin and the acidic preservative system, then target pH 4.8–5.1.
  • 5 Confirm preservation, stability and packaging compatibility before sale or extended use.
  • What “natural” really means

    There is no legal definition of “natural” for cosmetics in the EU, US or Gulf. In practice brands follow a private standard such as COSMOS (Ecocert, Soil Association and others) or ISO 16128, which define how ingredients are counted as natural or naturally derived.

    Natural does not mean unpreserved. A water-based facial cleanser can support bacteria, yeast and mould. Natural standards permit a limited set of preservatives, including sodium benzoate and potassium sorbate, but their performance still needs laboratory confirmation.

    The building blocks

    Cleansers

    Decyl glucoside provides plant-derived non-ionic cleansing; cocamidopropyl betaine supports foam and reduces the harsh feel of the blend.

    Thickeners

    Xanthan gum builds a pseudoplastic gel that spreads easily and remains independent of salt-thickening behaviour.

    Skin feel

    Glycerin and panthenol support hydration, allantoin soothes, and glyceryl oleate helps reduce post-rinse tightness.

    Preservation

    Sodium benzoate + potassium sorbate work only in acidic products; a chelator such as sodium phytate strengthens them.

    pH control

    Decyl glucoside is alkaline as supplied. Citric acid brings the finished cleanser to pH 4.8–5.1 for skin compatibility and preservative performance.

    Refatting

    Glyceryl oleate adds a lipid-replenishing benefit and gives the lather a creamier, less stripping after-feel.

    Why the finished pH matters

    The glucoside raw material begins alkaline, while sodium benzoate and potassium sorbate depend on an acidic environment. The finished cleanser therefore targets pH 4.8–5.1: compatible with facial skin and inside the preservative system’s useful range.

    Strong acid

    pH 2–3

    Facial skin

    pH ≈4.5–5.5

    Target cleanser

    pH 4.8–5.1

    Raw glucoside

    pH 11–12

    Gentle botanical gel cleanser — 100 g

    This formula reproduces the uploaded laboratory card at 100.00%. The 1.00% citric-acid solution is the allocated maximum: add only the quantity needed to reach pH 4.8–5.1, then return any unused balance to water. Verify each supplier’s active matter and specification before batching.

    Step-by-step method

  • 01 Sanitise Clean and sanitise all tools and packaging with 70% alcohol. Wear gloves and eye protection.
  • 01

    Sanitise

    Clean and sanitise all tools and packaging with 70% alcohol. Wear gloves and eye protection.

  • 02 Hydrate the gum Dissolve sodium phytate in the water. Disperse xanthan gum in glycerin to a lump-free slurry, then add it to the water while stirring until smooth.
  • 02

    Hydrate the gum

    Dissolve sodium phytate in the water. Disperse xanthan gum in glycerin to a lump-free slurry, then add it to the water while stirring until smooth.

  • 03 Build the surfactant phase Blend cocamidopropyl betaine, decyl glucoside and glyceryl oleate at low speed until homogeneous, without generating foam.
  • 03

    Build the surfactant phase

    Blend cocamidopropyl betaine, decyl glucoside and glyceryl oleate at low speed until homogeneous, without generating foam.

  • 04 Combine and cool down Add the surfactant blend slowly into the hydrated gel. Below 35 °C, add panthenol and fully dispersed allantoin.
  • 04

    Combine and cool down

    Add the surfactant blend slowly into the hydrated gel. Below 35 °C, add panthenol and fully dispersed allantoin.

  • 05 Preserve and adjust pH Add sodium benzoate and potassium sorbate, pre-dissolved if needed. Add the 50% citric-acid solution dropwise to pH 4.8–5.1.
  • 05

    Preserve and adjust pH

    Add sodium benzoate and potassium sorbate, pre-dissolved if needed. Add the 50% citric-acid solution dropwise to pH 4.8–5.1.

  • 06 Check and fill Confirm a smooth clear-to-translucent gel with no granules or persistent froth. Recheck pH, then fill into a clean pump or disc-top bottle.
  • 06

    Check and fill

    Confirm a smooth clear-to-translucent gel with no granules or persistent froth. Recheck pH, then fill into a clean pump or disc-top bottle.

    Common mistakes

  • Skipping the preservative Kitchen-style recipes without preservation become contaminated quickly, even in the fridge.
  • Skipping the preservative

    Kitchen-style recipes without preservation become contaminated quickly, even in the fridge.

  • Adding dry xanthan to water This creates fish-eyes. First make a completely smooth slurry with glycerin.
  • Adding dry xanthan to water

    This creates fish-eyes. First make a completely smooth slurry with glycerin.

  • Guessing the pH pH strips are too imprecise near the preservative limit — use a meter.
  • Guessing the pH

    pH strips are too imprecise near the preservative limit — use a meter.

  • Mixing too quickly High shear after adding surfactants traps foam and makes appearance and fill weight difficult to judge.
  • Mixing too quickly

    High shear after adding surfactants traps foam and makes appearance and fill weight difficult to judge.

    Safety and testing

  • Run a stability check: keep samples at room temperature, 40–45 °C and in the fridge for at least 4–12 weeks and watch for separation, colour, odour or pH drift.
  • Do a small patch test before facial use and avoid direct eye contact.
  • Before selling, a preservative efficacy (challenge) test to ISO 11930 and a safety assessment are required under EU Regulation 1223/2009 and similar GCC rules.
  • Frequently asked questions

    Build your own version

    Open the cosmetic lab to adjust this natural cleanser formula, check every line against material ranges, and prepare its INCI label.

    Build it in the cosmetic lab

    Explore natural cosmetic ingredients

    Sources

  • Regulation (EC) No 1223/2009 on cosmetic products, Annexes III and V (preservatives and restricted substances).
  • Cosmetic Ingredient Review (CIR) safety assessments: decyl glucoside and other alkyl glucosides; cocamidopropyl betaine.
  • COSMOS-standard Cosmetics Organic and Natural Standard, current version.
  • ISO 16128-1/-2: guidelines on technical definitions and criteria for natural and organic cosmetic ingredients.
  • IFRA Standards, 51st Amendment.
  • ISO 11930: Evaluation of the antimicrobial protection of a cosmetic product.
  • Lambers H et al. (2006), “Natural skin surface pH is on average below 5, which is beneficial for its resident flora”, International Journal of Cosmetic Science 28(5):359–370.