GUIDE · 10 MIN READ

Natural Shampoo Formula

A professional, step-by-step guide to formulating an all-natural, sulfate-free botanical shampoo with glucoside cleansers, a refatting lipid and an acidic preservative system — complete with a 1000 g laboratory batch.

Reviewed against EU Regulation 1223/2009, CIR, COSMOS and ISO 11930

The short answer

  • 1 Dissolve sodium phytate in water, then hydrate a glycerin–xanthan slurry into a smooth gel.
  • 2 At low shear, add coco-glucoside, decyl glucoside and glyceryl oleate as the cleansing chassis.
  • 3 Add panthenol, then sodium benzoate and potassium sorbate pre-dissolved in a little water.
  • 4 Bring the shampoo to pH 4.8–5.2 (optimal 4.9) with 50% citric acid, measured with a meter.
  • 5 Confirm stability and preservative efficacy (ISO 11930) before selling.
  • What “natural” really means

    There is no legal definition of “natural” for cosmetics in the EU, US or Gulf. Brands follow a private standard such as COSMOS or ISO 16128, which define how ingredients count as natural or naturally derived. Every ingredient in this formula is commonly accepted under COSMOS.

    Natural does not mean unpreserved. A shampoo is mostly water and is used in a wet bathroom — ideal conditions for bacteria and mould. Sodium benzoate and potassium sorbate are permitted in natural standards, but only work in an acidic product and still need a challenge test.

    The building blocks

    Cleansers

    Coco-glucoside and decyl glucoside are sugar-derived non-ionic surfactants: mild on the scalp, biodegradable, with dense, creamy rather than airy foam.

    Thickener

    Glucosides do not thicken with salt. All viscosity comes from the 0.8% xanthan gum network, so full hydration is essential.

    Refatting

    Glyceryl oleate dissolves into the micelles and replenishes hair lipids, offsetting glucoside dryness without synthetic conditioners.

    Conditioning

    Panthenol penetrates the hair shaft for lasting moisture and cuticle smoothing; glycerin keeps the scalp comfortable.

    Preservation

    Sodium benzoate + potassium sorbate are activated by acidic pH; sodium phytate binds hard-water metals and strengthens them.

    pH control

    Glucosides arrive at pH 11–12. Citric acid brings the shampoo to 4.8–5.2, sealing the cuticle for shine and activating the preservatives.

    Why the finished pH matters

    Glucoside raw materials are strongly alkaline, while benzoic and sorbic acids only protect the product in their undissociated form below pH ≈5.5. A finished pH of 4.8–5.2 keeps the cuticle flat (less frizz, more shine) and keeps the preservative system active.

    Strong acid

    pH 2–3

    Hair surface

    pH ≈3.7–5.5

    Target shampoo

    pH 4.8–5.2

    Raw glucoside

    pH 11–12

    All-natural botanical shampoo — 1000 g batch

    Exactly as exported from the Alchemix cosmetic lab: safety index 100/100, all ingredients within recommended and regulatory ranges, no interaction conflicts, EU / FDA / China clear. The citric acid is a working allowance — add only what is needed for pH 4.8–5.2. Check each supplier’s active matter before batching.

    INCI label declaration

    Aqua, Coco-Glucoside, Decyl Glucoside, Glycerin, Panthenol, Glyceryl Oleate, Citric Acid, Xanthan Gum, Sodium Benzoate, Potassium Sorbate, Sodium Phytate.

    Descending order of concentration per EU Reg. 1223/2009 Art. 19 and 21 CFR 701.3.

    Step-by-step method

  • 01 Equipment & sanitising Use a 0.01 g balance for small additions and a 0.1 g scale for water and surfactants, a 2000 mL vessel, a 250 mL beaker, a low-shear paddle and a calibrated pH meter. Sanitise everything with 70% isopropanol and let it air dry.
  • 01

    Equipment & sanitising

    Use a 0.01 g balance for small additions and a 0.1 g scale for water and surfactants, a 2000 mL vessel, a 250 mL beaker, a low-shear paddle and a calibrated pH meter. Sanitise everything with 70% isopropanol and let it air dry.

  • 02 Phase A — water and gel Charge 630 g water and dissolve 1 g sodium phytate. In the beaker, make a smooth slurry of 8 g xanthan in 30 g glycerin, pour it in at 400–600 RPM at 20–25 °C and mix 15–20 minutes until a clear, lump-free gel forms.
  • 02

    Phase A — water and gel

    Charge 630 g water and dissolve 1 g sodium phytate. In the beaker, make a smooth slurry of 8 g xanthan in 30 g glycerin, pour it in at 400–600 RPM at 20–25 °C and mix 15–20 minutes until a clear, lump-free gel forms.

  • 03 Phase B — cleansing chassis Drop to 100–150 RPM to avoid foam. Add 160 g coco-glucoside, 120 g decyl glucoside and 15 g glyceryl oleate. Stir gently 5–10 minutes until homogeneous and clear to slightly opalescent.
  • 03

    Phase B — cleansing chassis

    Drop to 100–150 RPM to avoid foam. Add 160 g coco-glucoside, 120 g decyl glucoside and 15 g glyceryl oleate. Stir gently 5–10 minutes until homogeneous and clear to slightly opalescent.

  • 04 Phase C — actives and preservation Add 20 g panthenol. Dissolve 5 g sodium benzoate and 3 g potassium sorbate in 15–20 g of water from Phase A until crystal-free, then add with slow stirring.
  • 04

    Phase C — actives and preservation

    Add 20 g panthenol. Dissolve 5 g sodium benzoate and 3 g potassium sorbate in 15–20 g of water from Phase A until crystal-free, then add with slow stirring.

  • 05 pH calibration Calibrate with pH 4 and 7 buffers. Add the 50% citric acid dropwise and measure at 20–25 °C to pH 4.8–5.2 (optimal 4.9). If below 4.7, raise with dilute 10% L-arginine or sodium hydroxide.
  • 05

    pH calibration

    Calibrate with pH 4 and 7 buffers. Add the 50% citric acid dropwise and measure at 20–25 °C to pH 4.8–5.2 (optimal 4.9). If below 4.7, raise with dilute 10% L-arginine or sodium hydroxide.

  • 06 Check and fill Expect a viscous, honey-like translucent gel with a creamy lather and no trapped air. Fill into amber or opaque PET/HDPE bottles with a disc-top or pump; store at 15–25 °C away from sunlight.
  • 06

    Check and fill

    Expect a viscous, honey-like translucent gel with a creamy lather and no trapped air. Fill into amber or opaque PET/HDPE bottles with a disc-top or pump; store at 15–25 °C away from sunlight.

    Troubleshooting

  • Fish-eyes or gel lumps The xanthan was not fully pre-dispersed in glycerin. Always make a uniform slurry first.
  • Fish-eyes or gel lumps

    The xanthan was not fully pre-dispersed in glycerin. Always make a uniform slurry first.

  • Shampoo too thin Salt will not thicken glucosides. Viscosity comes only from the xanthan — make sure it is fully hydrated.
  • Shampoo too thin

    Salt will not thicken glucosides. Viscosity comes only from the xanthan — make sure it is fully hydrated.

  • Slight cloudiness Glyceryl oleate and glucosides give a warm, semi-translucent sheen. After cold storage, warming to 25 °C restores clarity.
  • Slight cloudiness

    Glyceryl oleate and glucosides give a warm, semi-translucent sheen. After cold storage, warming to 25 °C restores clarity.

  • Low foam Glucosides make fine, creamy foam rather than flash foam; the phytate prevents hard water from suppressing it.
  • Low foam

    Glucosides make fine, creamy foam rather than flash foam; the phytate prevents hard water from suppressing it.

    Safety and testing

  • Fragrance-free and essential-oil-free, suited to sensitive scalps. Avoid eye contact; rinse thoroughly with water if it happens.
  • Wear safety glasses when handling acids and alkalis during compounding.
  • Run a stability check at room temperature, 40–45 °C and in the fridge for 4–12 weeks, watching viscosity, colour, odour and pH drift.
  • A realistic 18–24 month shelf life must be confirmed by ISO 11930 / USP <51> preservative efficacy testing and a safety assessment under EU 1223/2009 or GCC rules before sale.
  • Frequently asked questions

    Build your own version

    Open the cosmetic lab to scale this shampoo, check every line against material ranges and prepare a regional INCI label.

    Build it in the cosmetic lab

    Read the sulfate-free shampoo guide

    Sources

  • Regulation (EC) No 1223/2009 on cosmetic products, Annexes III and V (preservatives and restricted substances).
  • Cosmetic Ingredient Review (CIR): safety assessment of decyl glucoside and other alkyl glucosides as used in cosmetics.
  • COSMOS-standard Cosmetics Organic and Natural Standard, current version.
  • ISO 16128-1/-2: technical definitions and criteria for natural and organic cosmetic ingredients.
  • ISO 11930: Evaluation of the antimicrobial protection of a cosmetic product; USP <51> Antimicrobial Effectiveness Testing.
  • Gavazzoni Dias MFR et al. (2014), “The shampoo pH can affect the hair: myth or reality?”, International Journal of Trichology 6(3):95–99.